When carrying out cargo tie down, a binding belt is often used for binding. Bundling straps, also known as cargo strapping straps, are used to fix goods during transportation, movement, shipment, or storage. They have locking properties, will not fall off, are safe and reliable, are light and easy to operate, and protect objects from damage. It can be applied to various environments according to different hooks. Also known as binding device, fastener, tightening belt, military binding belt.
The operation method of the cargo binding is as follows: Step 1: Unfold the cargo binding belt, glue the velcro to make the binding band form a loop, hold the binding belt at two points with both hands, the velcro must be completely glued; Step 2: Attach the loop Sleeve the lashing belt on the stack, hold the lashing belt tightly with both hands at two points, if necessary, you can ask for help from others; Step 3: Tighten the lashing belt firmly, adjust and re-adhere the Velcro, hold the lashing belt at two points with both hands, Adjust the bonding position and fully bond the buckle again, so that the lashing tape can fully bind and fix the goods; Step 4: Adjust and fix the position of the lashing tape. When the entire pallet is stacked, the lashing tape must be in the cargo The position between the top layer and the second layer can be used to fix the goods.
When using it, there are a few things to pay attention to. Only use undamaged strapping, the label can clearly indicate the ability. Can not be overloaded. Do not use the webbing with knots. When using, please try to keep the fabric away from sharp edges and corners to avoid abrasion or cutting. Avoid twisting and twisting the tensioner. Do not place objects on the binding device to avoid injury. Do not use the binder as a load lifting adjustment. You can also use a ratchet buckle to tighten the fixation.